工大瑞普新版CCNP实验手册Word版

CCNP

本帖最后由婷婷于 2010-5-24 16:36 编辑

工大瑞普新版CCNP实验手册Word版
之前发布了个CCNP 实验手册 PDF版的，有需要WORD版本的顶一下哈
附链接>>思科CCNA和CCNP实验手册汇总
http://www.51chongdian.net/bbs/thread-13852-1-1.html

工大瑞普新版CCNP实验手册Word版
文件大小：(9.7 MB)
发布日期: 2008-09-18

CCNP实验手册目录：
Building Scalable Cisco Internetworks 3
Lab 1. Configuring Basic EIGRP 4
Lab 2. Configuring Default-network for EIGRP 8
Lab 3. Manually Summarizing EIGRP Routes 15
Lab 4. Configuring EIGRP Unequal-Cost Paths 22
Lab 5. Configuring EIGRP Authentication 26
Lab 6. Understand EIGRP Query 30
Lab 7. Configuring Basic Multi Area OSPF and Area Summary 38
Lab 8. Configuring OSPF in NBMA 43
Lab 9. Configuring OSPF Authentication 51
Lab 10. Configuring OSPF External Summary 58
Lab 11. Configuring OSPF Default Route With Metric 62
Lab 12. Configuring OSPF Stub Area 66
Lab 13. Configuring OSPF Totally Stub Area 71
Lab 14. Configuring OSPF NSSA Area and NSSA Totally Stub 75
Lab 15. Configuring OSPF Virtual-Link 83
Lab 16. Configuring OSPF Virtual-Link（Cont.） 87
Lab 17. Understand OSPF Routing Between Inter Area 91
Lab 18. Configuring Basic IS-IS 94
Lab 19. Configuring IS-IS Multi Area and Summary Route 99
Lab 20. Migrate IS-IS Area 106
Lab 21. Redistributing into RIP and OSPF 111
Lab 22. Redistributing into EIGRP and IS-IS 115
Lab 23. Redistribution Using Administrative Distance 120
Lab 24. Filtering Routing Updates with a Distribute List 123
Lab 25. Filtering Routing Updates with a Router Maps 127
Lab 26. Using Route Tag Filtering Routing Updates 131
Lab 27. Policy-based route 135
Lab 28. Configuring Basic BGP 139
Lab 29. Configuring BGP Using Loopback Addresses 143
Lab 30. Understand BGP Auto-Summary 147
Lab 31. Configuring BGP Summarization 152
Lab 32. Understand BGP Sychronization Rule 156
Lab 33. BGP Neighbor Authentication 164
Lab 34. Configuring BGP Local Preference 169
Lab 35. Using Route Maps to Configuring BGP Local Preference 175
Lab 36. Configuring BGP Multi-Exit Discriminator 182
Lab 37. Configuring BGP Weight 188
Lab 38. Affects the BGP Routing By Path Prepend 194
Lab 39. Using Route Tag to Store BGP AS-Path 198
Lab 40. Using Distribute-list to Filtering BGP Routing 204
Lab 41. Using Route-Map to Filtering BGP Routing 207
Lab 42. Using Prefix-List to Filtering BGP Routing 210
Building Cisco Multilayer Switched Networks 215
Lab 43. Configuring 802.1x Port-Based Authentication 216
Lab 44. Routing Between VLANs and VTP Protocol 223
Lab 45. Configuring L2 & L3 EtherChannel with PAgP 233
Lab 46. Configuring L2 & L3 EtherChannel with LACP 241
Lab 47. Configuring Layer 3 Redundancy with HSRP 246
Lab 48. Configuring Layer 3 Redundancy with VRRP 254
Implementing Secure Converged Wide Area Networks 261
Lab 49. Configuring the CPE as the PPPoE Client 262
Lab 50. Configuring GRE Tunnels 274
Lab 51. Configuring IPsec Site-to-Site With Preshare-Key 278
Lab 52. Configuring IPsec Site-to-Site VPN Using SDM 291
Lab 53. Configuring GRE Tunnels over IPsec With Preshare-key 300
Lab 54. Configuring GRE Tunnels over IPsec using SDM 307
Lab 55. Configuring Cisco Easy VPN and Easy VPN Server Using SDM 319
Lab 56. Basic MPLS Frame-Mode Configuration 335
Lab 57. Basic MPLS VPN Configuration 342
Lab 58. Configuring Reflexive ACL 357
Lab 59. Configuring Two-Interface Firewall with CBAC 364
Lab 60. Configuring Three-Interface Firewall with CBAC 371
Lab 61. Configuring Cisco Router AutoSecure 378
Lab 62. Enable Authentication Proxy 387
Lab 63. Configuring an SSH Server for Secure Management 393
Optimizing Converged Cisco Networks 400

工大瑞普CCNP实验手册WORD版.rar(9.7 MB)
网盘下载